Boat Deck Foam Sheets – Custom Cut-to-Fit EVA Mats

false

Application process was pretty straight forward other than you do want the roller and outdoor carpet glue. One roll of the 90x 47.5 covered half of my 16 foot long boat. You will need at least 4 rolls just to do an entire boat with hatches and storage boxes

I initially thought about getting the desert snow since it matches so well, but last second got the blue to add a lil color. And I really like it! As you see it’s just a small bass boat. I stand in it a lot and the bottom fatigues my feet and calves for some reason. This sticks to the lauan plywood base really well and provides a good bit of cushion too. It’s been rained on and taken on mud and all sorts of crud, but still looks pretty good!

Was very excited when I found this product. I use my boat mostly for fishing but also take my family out on the river. I was looking for a floor covering that would look good, have some flex and not get hot in the summer sun. I made the decision to give the EVA flooring a try.
I measured the surface that I was going to cover and ordered the flooring on Amazon. Upon receiving I took the time to prep the aluminum floor as directed. All the old paint came off the floor and was sanded and cleaned with acetone. The flooring was cut and laid out before removing the backing. The adhesive is very sticky and I was dealing with some rather large pieces which made it very challenging doing this by myself. Installation took about 10 hours.
This was done in August of 2023. The boat had been out several times since and we couldn't be happier with the end results.

I am just now starting to renovate my old Jon boat and I got this foam decking with a straight groove to cover the floor. I still need to remove all the paint and install an aluminum floor before I apply. I've heard negative things about off-brand foam boat decking not sticking for very long. So I want to prep the surface carefully, just in case the opinions are warranted. I use this old boat mostly for back water fishing and duck hunting, so I think the camo will blend nicely into the environment. I don't baby the boat, so I want something to last through some harsh punishment and harsh, cold and wet weather. The deep straight grooves should drain water very quickly to the back of the boat and always give me a dry place to stand. This roll is enough to do the two floor areas. I recommend this and am looking forward to the finished product.

I'll be honest, I don't own a boat and don't live near water. However this product is exactly what I was looking for. I have a deck outside our patio door and wanted a weatherproof mat that adhered to the floor. This flooring was perfect. It laid down nice and flat, the whole bottom is adhesive (peel and stick) and is heavy dense foam. So it works great for an outdoor mat in front of my patio door. It is good quality, I don't worry about it wearing out and since it's dense foam I don't worry about the rain (not slippery either). Not using it as intended, but a great alternate use. Glad to have it. I hope this was helpful.

This is a roll of boat flooring. It measures 94.5 inches x 23.6 inches. It is in blue camo and has self-adhesive backing. The colors are vibrant, the EVA foam is sturdy and easy to work with. This product is made to go on the floor of a boat, to that end, it is made to withstand water and still be non-slip when wet. We decided that the best use of this would be for the front ramp into our house. This looks beautiful, sturdy, it protects our ramp from the weather, and provides a safe surface to walk up and down on (great traction). This flooring is tough and still looks good after being used extensively. This is an excellent product and I'm happy to have it!

I like this roll of EVA marine decking because it’s really thick and the adhesive is super sticky.

I have a Kayak that’s just beginning to fade slightly on the upper surfaces. This roll ( 94.5”x 23.6) is plenty enough to do my kayak’s inside , floor and upper surfaces.
The pre-cut kit costs 5x what this’d rolls sells for.
There are nice grooves cut into the mat to let water drain. It’s nice that the pattern goes all the way through the pad.
It’s easy to cut and install.
I made sure to clean the surface well and installed a few pieces I’d cut out.
I rolled it down with a floor roller and it is stuck on there really good.
This material is among the thicker mats I’ve seen.
This mat is really going to change the way my kayak looks. I can’t wait to get it finished.
I really like that it’ll stop the UV rays as act as a sound deadener.
I’m getting a roll for my buddy’s kayak as a gift. He already commented on how much he likes the few pieces I’ve already installed.
I highly recommend this marine mat for your kayak or boat.

The color design of the flooring was perfect for my camouflage, painted boat. The foam is dense and provides a nice cushion to stand on while fishing. One thing I must note is that the surface needs to be cleaned and scraped before applying the adhesive pad. I had thought that I had cleaned it up enough, but apparently I was wrong as the padding started to come up and peel paint from the bottom of the boat. Knowing what I know now I would’ve spent much more time preparing the surface before applying the pad. I don’t blame the manufacturer as the pad has plenty of sticky material and once installed will be a very nice addition.

It was an expensive mistake, but I like the color and quality of the padding so much. I ordered another to complete the job. I hope this helps.

Love the color combination on this boat flooring. Feels good to walk on and very durable material!

Thick, nice quality.
Nice print - some are garish or weird.
Colors go all the way through the material so if you scratch it, it won't show.

Maybe some tips for installation or instructions. I think extreme cleanliness of the surface you are applying it on is in order. It can't be that hard tho.

Only time will tell, about to install this on a boat that sees a lot of direct sunshine. I will update the review for colorfastness and adhesion after a summer of use.

Yes work great and looks good

Used this on the floor of a twelve foot Lowe Jon boat I refurbished. Used a piece of exterior plywood with notches cut out so the piece drops in and fills in the area between the rear and middle seats. I coated the plywood with two-part epoxy to give it a smooth finish. This stuff stuck to the plywood very well and has held up over the past three months.

It is easy to cut with a razor blade. I also put smaller pieces on the bow-mount for the trolling motor to help it stay in place and other small peices where the seats are mounted in the boat.

Great product is as described

Used these for a custom trunk project in my Bronco to stop cargo sliding around on an aluminum surface. Works great!

Our boat look awesome with this as the floor, no slip hazards anymore

Sticks well cuts easy and looks great ! A great alternative to the outrageous cost of hydro-turf.

EVA foam is soft and durable. Easy to cut and install. Sticks well to the existing floor and looks amazing! Highly recommend this product and seller!

Looks great, trims easy with sharp razor blade, let warm up in sun and sticks awesome.

A little hard to maneuver as it’s thick and not very pliable but once on, it looks great

My husband is redoing our boat. This carpet was easy to work with. I highly recommend this product

It's easy to handle with scissors or a knife, has good colors and patterns, and can go with a lot of colors. Very satisfied with the quality, flexibility and end result.

Easy to install, looks great - adhesive is super sticky

This is the perfect boat, we have young children, the paving is very soft and the children climb on it!! It fits perfectly and looks even better