FOCEAN Classic Stripe EVA Foam Boat Flooring Sea Deck

Looks awesome on the boat and makes the floor not slippery. Also makes it look very fancy. Everyone will complement your boat if you get this washes off easy sticks well takes a few hours to put in.

15�� Boat used the biggest roll and only did 3/4 of the boat.

It looks great on the boat. I used adhesive spray to make sure it would stay down over all of the ridges in the boat. Comfortable material to walk on barefoot and not slippery when wet. Let��s see how long it lasts��

Made the boat look totally different install takes some effort but a little patience and work will get it done

Just finished installing the product so don't have any long term durability info yet but thought I would share what I learned. A major part of the success of your project will come down to how A) How well you prepared your surface for a good adhesion. and B) How well you measured and made your templates. The cockpit of my boat was previously painted so I sanded and freshly painted my entire cockpit with topside paint a few weeks before install time. And then on the day of install just went over every section really well with acetone to make sure their was no grease or dust before I applied. And as far as measurements go. well every persons project will be different but don't rush this step. It is very important. Think about where you will need to make breaks due to boat layout or due to the size of the material all while making it look like that is how it was meant to be. Draw out your space on paper with measurements and think about how much material you will need to complete your project. I suggest buying an extra roll more than you think you will need to be able to fix pieces in the future but also because UNFORTUNATLY this product is made so the rolls do not end on full boards. (This cost them a review star) And a few of my rolls were not even cut straight. So there was more waist than would be otherwise. When making templates. Think about how you will make all your lines line up throughout your entire project to make it look like it all flows visually. I made templates on a roll of paper. I had textured edges in the fiberglass of my cockpit about a 1/2 inch back from the edge of each section where the non skid was. so I rough cut the piece to fit and taped in place then went over with a stick of artist graphite rubbing around edges to get an exact line on the paper where my edges were. I would also measure out and draw in 1/2 inch variances around objects that will need to be varnished in the future so I can still have room to get in there to tape, sand and varnish. also around any water fill caps or fuel fill caps, hatch hinges etc. Everyone's layout will be different but think about future maintenance and usability. Also in my opinion having the border space around everything looks really good and having the edge of the product back from the edges will keep it from getting caught on things and peeling up. I also took exact measurements of gaps between pieces to help me to be able to lay out templates later at home and in order to have all lines on the EVA Flooring line up perfectly. So you have to account for all space between each template section. In other words. Slow down and really put on your thinking cap on and give yourself all the necessary information in order to properly layout your job later on your material if you want straight flowing lines throughout your floor. It was not always so easy or obvious how to accomplish this in complex shaped areas. I drew pictures of the floor layout and assigned a letter and signified port or starboard. I did this to each section on my drawing and put a piece of painters tape with corresponding letter on each section of the boat and on each paper template section as well as each piece of EVA Flooring when cutting out. I had to do this to keep things organized. This really helped me throughout project because when you have a bunch of similar looking pieces later on if I did not have everything lettered I would have been overwhelmed and confused for sure. Ok, so once templates were all cut out I would go back and then I would dry fit the templates to make sure I did not mess up anything. Measure many times and only cut once. Ok so moving on I took the EVA Foam Decking out of the box and laid them out flat in my driveway in the sun and put weights on them to relax the material as best I could and get it to lay flat. I saw other reviews saying the product could shrink so I figured I would listen and just set them out for the day to be safe. This helped flatten them out and made much easier to cut. So I then cut all the pieces out. I made rough measurements and cut large rolls down to more manageable sizes and then traced my templates exactly and cut out. I had lead 1lb. fishing weights and water bottles on EVA material as well as my templates while cutting out to hold template down smooth as well as flatten EVA material out as much as possible to make accurate cuts. After I cut out I used a bottle cap to draw rounded edges on all corners for a more finished look and then cut those off. Then once that was finished I carefully went around all edges with the edge of a orbital sander with 100 grit paper to bevel edges to match the factory finished board edge look. I then went back around with 220 grit to smooth out to finish. I suggest practicing this on some scraps before doing on your final product. It takes a little finesse but well worth the time. Once this is done I was ready for install. (I saw many reviews suggesting additional adhesive. I personally fe...

I know it's just what I need when I got it. It looks nice and goes well with my boat. This is the first time I purchased this kind of boat flooring, but it's really high-quality product. Easy cut and installation, one thing I want to remind of is be careful of the glue as the adhesion is pretty strong and durable. I almost spend half a Sunday with the assistance of a friend, and luckily got all the boat flooring completed. As soon as I finished, I can't wait to go fishing with the upgraded boat. As advertised, it's comfortable and slip resistant, all feel good. Overall, I am very pleased with this product, as far as how long it holds up, surely time will tell. Thank FOCEAN providing a good product! Highly recommend to everybody!

I really like the way this looks on my boat. I applied it to my swim deck and along my gunnels. Then used what was left to libe my dry storage box. It adds a non slip surface to the high travel areas and a soft base for my phone and other items for storage. It feels great on my feet and adds a nice look to the boat. I cuts really easy with some heavy shears.

I've had this installed on my boat for a little over a week now and am very impressed so far. I wanted to get a custom set made for my boat and couldn't find anyone who had the templates, so after watching a variety of videos on YouTube I decided I would give this a shot and do it myself. The installation process went pretty well, I tried to create a template using plastic cheating to trace the outline of my flooring panels. I used what I had which was 4 mil thick, it was not very effective, if you try this method use something thicker like seven or eight like I saw in the videos. I did lots of measuring and mapped out the pattern on the material with masking tape, and then I cut it out using very fresh razor box cutters, and then I used good quality hole saws to cut out the round feet for my seats. I also used a paint can as a template to cut the round circles for my access caps and as you can see my measurements were a little off.

Overall I'm really happy with how it turned out, I wish I could have cut it a little more accurately but it looks great until you get really close and look at my cup marks and then you can see some of my mistakes. After a week installed the adhesive is holding great, it's a daily use for a week with lots of water coming in from swimmers, it does not get too hot to the feet even after sitting out in the sun all day. It feels great on the feet and the grip is much better than the textured fiberglass. The piece I put on the swim platform is so nice and makes the swim platform feel less slippery. I just wish I cut that pattern better, but oh well I might by another strip and do that one over again.

One thing to note is there's a slight shade variance from the two different width rolls I bought even though they're the same color combination. One is slightly lighter than the other, again you won't really notice unless you really pay close attention but it was noticeable when I was installing it.

This product works fantastic! I hade a quote from a company to install my floor for over several thousand. This product cost me $125 and works great. Easy to install and sticks very good to stay in place. Made me boat look years younger and modern. Highly recommend.

After installing according to manufacturers instructions and using extra adhesive on the seams after a day the seams opened up. I do not recommend this product for pontoon flooring. You will end up with noticeable gaps in the flooring.

Looks awesome on the boat and makes the floor not slippery. Also makes it look very fancy. Everyone will complement your boat if you get this washes off easy sticks well takes a few hours to put in.

I'm very impressed! The material is soft yet durable, providing excellent grip even when wet. It was easy to cut and install, and it gives my boat a sleek, professional look. The foam is comfortable underfoot and really helps reduce noise and vibration. Highly recommend for anyone looking to upgrade their boat flooring!

Best addition for the boat, should have done it long time ago! Beautiful and super practical

I used it on my sprinter van step platforms in replacement of the sand grid paper that was there. And this product is good. It’s not slippery when wet and it seems to be very durable and resistant. It looks good.
It’s easy to cut and apply. And very affordable.

Muy bueno

Color is a warm brown, attractive without any orange tinge - matches the wood stain I was striving for.
Minimal chemical smell was not concerning (airing the product outside was not necessary).
Easy to cut with sharp utility scissors.
Good adhesive (caution - sticks permanently to itself).
Roll was cut straight and material is a nice texture.
Packaged very tightly rolled making it unwieldy to work with.
Need it to be perfectly flat before installing.
After several days in a 70F heated space, it is barely starting to unfurl - deducted one point for this.

I replaced the friction treads on the steps of our rv with this stuff (forgot the name) and I have to say that I was impressed with the ease of installation and the substantial feel. The material was easy to cut and shape and the adhesive seems to be stout. We're happy with the new look and feel of the steps.

I plan on using this for decorating my boho style room and put the actual planks vertical but overall the material is nice and thick and you just peel off the adhesive in the back and place it where it needs to go very starting material

I must have received the stuff at the end of the roll. The glue backing is yellow and was peeling from the start. The protctive layer was overlapped looks like machine failure. Tried to contact amazon and seller but its all robots. So said screw it il try it out and it just lifts, Not sure on durability, yet since i just installed but was using as flooring in my camper van conversion and had big ideas for a cool easy to clean and waterproof solution. Kinda hard when the stuff wont even lay down.

It's comfortable to walk on and provides firm footing. It looks great and is easy to cut and install. Used it to cover a casting platform on a small boat.

Damon M. Tatem

Got this foam boat decking marine flooring to replace my garage flooring. This is definitely not its intended use, but when this project will be completed, it will look really cool and also easy to clean! Have not seen anybody do that yet. ;)

Will update this review with finished photos and will let you know if that was a bad idea or not. LOL